AURA+ Titanium HI Adhesion First Down White – WFA-66
Part of the Titanium range, the WFA-66 is a first down white engineered to meet the highest performance while supporting the demanding regulatory standards for indirect food packaging. Developed to enable compliance with the Swiss Ink Ordinance and German Ink Ordinance and manufactured in line with EuPIA guidelines.
The ink has been developed for print applications where a high adhesion is required and provides maximum white opacity. Offering excellent performance on press and through post print applications.
Key Features and Advantages
- Developed in accordance with Swiss Ink Ordinance and German Ink Ordinance
- Developed in accordance with Nestle Guidelines
- Developed and manufactured in line with the EuPIA guidelines for indirect food packaging
- No Intentionally added PFAS and BPA
- Excellent opacity and hiding power on clear substrates
- Brilliant whiteness
- Good flexibility
- Gloss finish
- Fast for cure
- Low viscosity for application via a flexo unit
- WFA-66 offers good adhesion on a range of supported and unsupported substrates
Technical Information
| Viscosity | 550 – 750 cps at 25°C |
| Volume Recommendations | 8.0 – 10.0 cm³/m² |
Substrates
This ink system has been purposely designed for use on many papers, boards, synthetics and foils both supported and unsupported. The inks are press ready and the use of performance additives is not recommended without prior consultation or recommendation by ALDUS INKS. This ink system is not suitable for thermal active papers without the use of a suitable over varnish.
NB. Due to the wide variety of synthetic substrates available we cannot provide guarantees for ink adhesion. We recommend the use of good quality top coated substrates. Non - top coated substrates can also be converted providing the material is corona treated or primed prior to printing.
It is recommended that adequate testing be carried out prior to production runs.
Overprinting
All inks detailed in this information sheet are free from surfactants and are considered suitable for overprinting using thermal transfer ribbons, hot foils, laser toners, flexo and screen inks. Please note that due to the wide variety of ribbons, foils and toners which are available, we always recommend overprintability trials be conducted for suitability when using these products for the first time or if the print construction changes.
It is important that tests are carried out to ensure good results can be achieved when printing on press.
Other Information
All products must be mixed/stirred thoroughly to ensure consistency prior to printing, failure to do so may alter the performance or finish of the ink.
This product can be used for indirect food packaging applications without the presence of an absolute barrier, such as glass or metal as part of the final packaging construction.
Full legislative, regulatory and compliance information regarding the AURA+ products is available upon request.
Storage and Shelf Life
All products detailed in this information sheet have a guaranteed shelf life of 12 months but storage conditions are imperative. The container should be closed immediately after use and stored in a dry area at 5-18°C away from direct sunlight. This guarantee only applies to sealed, unopened containers.
The information contained in this General Information sheet is based on the experience of ALDUS INKS and our internal laboratory test procedures. It is not to be interpreted as a warranty or guarantee in any form as conditions and variables beyond our control can affect the end result. We recommend press trials when using new substrates and other print related variables for suitability purposes. We reserve the right to alter any product data as a result of technical or manufacturing processes.
Technical Datasheet
Download AURA+ Titanium HI Adhesion First Down White PDF